Types -->>| FTE | FFE | HTE | HFE | HSE | LTE | ESE |
| Quartz Infrared Heating Elements | Short Wave Infrared Lamp | Thermocouples |

| Microtubular Coiled Heaters | Reflectors |

Features

Microtubular coiled heaters are manufactured to a revolutionary design, which makes them the best choice in the most demanding conditions.
The resistive wire is uniformly distributed in a compacted MgO insulation, with a CrNi-steel outer protection sheath.
The heaters are annealed after manufacturing, thus acquiring a high malleability that allows their being subsequently bent into any complex shape, with extremely narrow bending radius.
heaters are used in various applications, due to their being intrinsically reliable and highly versatile. They were first designed for a very specific application, the differential heating of plastic injection nozzles, and later become invaluable in the most diverse and demanding applications.
Aerospace, railway, chemical, metalworking and food industry, glass and paper industry, automotive, packing, medical industry... all have taken advantage from the use of heaters, with their wide range of possible shapes and their fitness to an unlimited number of applications.
 
Winning Features
 
  • A very wide contact surface results in exceptio-nally high levels of thermal conductivity towards the body that needs to be heated
  • Optimal insulation results in very long life duration
  • Heavy-duty construction results in very high resistance to mechanical shocks
  • Operation temperature up to 700°C (1300°F)
  • Very low mass results in extremely low thermic inertia
  • Optional built-in thermocouple for high-resolution temperature measuring (J-type standard; K-type on request)
  • Unlimited range of possible shapes obtained from the straight heater
  • Heaters can be incorporated into brass or aluminium castings
  • 10 different cross sections are available to fulfil any requirement
  • Wide range of straight standard heaters normally in stock, ready for coiling/shaping
 

CROSS SECTION
1.5 1.8 3.3 3.7  
3.3 x 3.3        
1.1 x 1.9 1.3 x 2.3 1.8 x 3.2 2.2 x 4.2 4.5 x 8

 

Feeding Cables and Protection Variants (standard length 1 m)
 
CGS Standard solution for all models in stock: PTFE-insulated Nickel leads, protected by a strong, flexible, thick glass/silicone sheath.
 
CGM PTFE insulated Nickel leads, protected by a stainless steel flexible braid.
 
CTF PTFE insulated Nickel leads, protected by a stainless steel flexible hose with outer diameter 8 mm.
 
CFL Free PTFE insulated Nickel leads, non-protected.
 
CMR Only Micro and Mini. Transition adapters in compacted MgO.
     



3.3 x 3.3 + 0.15
1m cable, type CGS,
with or w/o TC
Lenght L (mm) 3%   Heated Lenght (mm) 5%   Power (W) with 230V 10% Power Density (W/cm) with 230 V
250 205 175 6.5
300 255 225 6.7
350 305 250 6.2
400 355 300 6.4
450 405 350 6.5
500 455 400 6.7
600 555 450 6.1
700 655 500 5.8
800 755 600 6.0
900 855 700 6.2
1000 955 800 6.3
1200 1155 900 5.9
1400 1355 1000 5.6
1600 1555 1100 5.4
1800 1755 1250 5.4
2000 1955 1400 5.4



2.2 x 4.2 + 0.15 1m cable, type CGS,
with or w/o TC
Lenght L (mm) 3%   Heated Lenght (mm) 5%   Power (W) with 230V 10% Power Density (W/cm) with 230 V
300 255 175 5.4
350 305 210 5.4
400 355 250 5.5
450 405 280 5.4
500 455 315 5.4
550 505 350 5.4
600 555 385 5.4
700 655 450 5.4
800 755 525 5.4
900 855 600 5.5
1000 955 660 5.4
1200 1155 800 5.4



1.8 x 3.2 0.15
1m cable, type CGS,
w/o TC
Lenght L (mm)
3%
Heated Lenght (mm)
5%
 Power (W)
with 230V 10%
Power Density (W/cm) with 230 V
250 205 175 8.5
300 255 200 7.8
350 305 250 8.2
400 355 300 8.5
450 405 350 8.6
500 455 400 8.8
600 555 425 7.7
700 655 450 6.9

Top

 

| Home | Products | Tech-Spec | Trade Enquiry | Contact Us |